SODECA / Model
SODECA HEP
Wall-mounted axial ventilation from SODECA, with an IP65 motor and a reinforced-polyamide impeller. Request selection against the required airflow, pressure and electrical supply.
- Product family / model
- SODECA HEP
- Brand
- SODECA
- Category
- Ventilation fans
- Availability
- Confirm availability and delivery with your quotation.
Model series: HEP
HEP is a SODECA wall-mounted axial fan series.
Browse axial fan model series →HEP technical information
| Installation | Wall mounted; axial airflow |
|---|---|
| Impeller and support | Fibreglass-reinforced polyamide 6 impeller; sheet-steel support |
| Motor | Class F insulation, ball bearings, IP65 protection and built-in PTC |
| Electrical supply | Single phase: 220–240 V, 50 Hz. Three phase: 220–240/380–415 V, 50 Hz. |
| Operating temperature | 4-, 6- and 8-pole motors: −25 to +60 °C. 2-pole motors: −25 to +45 °C. |
| Air direction | Standard: motor to impeller. Reverse direction is an on-request configuration. |
| Guard reference | Manufacturer cites UNE-EN ISO 12499; verify the selected assembly. |
| Finish | Polyester-resin coating cured at 190 °C following phosphate-free surface treatment. |
| On-request variants | F: motor, impeller and guard assembly. G: motor and impeller assembly. Alternative voltage windings require confirmation. |
Applications
- Project-specific ventilation selection
Features & accessories
Use the published technical information above and the relevant documents to confirm features, controls, installation requirements and optional accessories.
Approvals & certifications
Approvals and certifications apply to relevant products / entities and remain subject to current validity and project requirements.